Product Portfolio
Click on a photo to enlarge it.
Steel Tubing
|
Circular Cooling Coils
• 1/4" OD Steel Tube Coiled • Used to cool down the temperature of castings • Re-designed for Customer application
|
|
|
Chipping Gun Nozzles
• 1 1/4" OD Steel Tube • Tubing Shaped and Reduced to Spec • Lower Flange Machined & Welded for Attachment
|
|
|
Oil Drain Line
• 1" OD Steel Tube with 3/8 Steel Flanges • Flanges Silver Soldered for Assembly • Drain Line Component is Used in a Large OEM Industrial Engine
|
|
Aluminum Tubing
|
Mounting Support
• 1" Bent Aluminum Tube • Support for GPS/Electronics used in a Golf Cart
|
|
|
Circular Cooling Coils
• 3/8" Aluminum Tube Coiled • Used in a Cooling Application • Specific OEM application
|
|
|
Weather Station Tripod
• 1 1/2" and 2" Aluminum Pipe • Tripod Stand and Mechanicals for Computerized Weather Station • TIG Welded throughout
|
|
Copper Tubing
|
Square Cooling Coils
• 1/8" Copper Tube Coiled in a 2" square • Cooling Coil is used in OEM Devices • Tubing Ends are Expanded to Allow for a Precision Fit for an Injection Molded Nipple
|
|
|
Laser Cooling Lines
• 1/4" & 3/8" Copper Tubing • Used in a Laser Cooling Application
|
|
|
Linear Cooling Loop
• 1/8" Copper Tube • Used in the Cooling of an Instrument • Triad Assisted in the OEM Design for Manufacturability
|
|
Stainless Steel
|
Circular Cooling Coil
• 1/4" OD 304 Stainless Steel Tube • Stainless Steel Tube bent into a 3" circular coil, 4" in length • This SS Cooling Coil is used in the Temperature Control of OEM Equipment
|
|
|
Manifold Assembly
• 3/8" OD, 304 Stainless Steel Tube, with (4) 1/4" NPT Nipples • Triad Both Designed & Manufactured this Manifold Assembly for the OEM. Stainless Steel Tubing was Cut and Bent. The Assembly and Nipples Silver Soldered. • The Manifold Assembly is Used in Commercial Cleaning Equipment
|
|
|
Tube Supply Line
• 1/4" OD Stainless Steel Tube • Tube Bent, Flared for Tube Fittings and Assembled • This Stainless Steel Supply Line is used in the Hydraulics System of an Industrial Engine
|
|
Custom OEM Tubular Handles
|
180° Folding Equipment Handle
• 7/8" Steel Tube Handle, 3/8" Steel Axle, 12 gauge Sheet Metal Brackets, Plastic Injection Molded Hardware. • The Handle is Attached to Equipment and Folds 180° for Easy Storage • Triad Redesigned, Fabricated, and Assembled the 180° Handle, Reducing Costs by Approximately 30%
|
|
|
OEM Equipment Handle
• 3/4" Aluminum Tubing • Tube was cut and bent, ends threaded • Handle is used by an OEM in their manufacturing
|
|
|
Small Instrument Handle
• 1/4" Stainless Steel Tubing • Handle used in an Electronic Compass • Designed and Manufactured to Fit Customer Device
|
|
|
Large OEM Case Handle
• 20' of 1" Steel Tubing • Complex Multi Radius Tube Bending • The Steel Handle Completely surrounds the Large Dehumidifier, Allowing the Machine to be Handled in Any Position
|
|